class Enlighten::IPrecompute

└>Geo::IGeoReleasable

The Low Level Enlighten Precompute API.

Enums

Name	Description
EMinimumCompatibleVersion	Controls if Precompute should generate data that can be used by older Enlighten run time APIs.
EStateDump	Controls the amount of reproduction data saved by the IPrecompute tasks.

Functions

Name	Description
AssembleSystemGeometry(const IPrecompInputSystem , const IPrecompInputGeometry const , Geo::s32, Geo::IGeoProgressProxy , IPrecompPackedSystem *&)	Assemble system geometry.
CalculateCubeMapSystemDependencies(const IPrecompInputCubeMap , const IPrecompPackedSystem const , Geo::s32, Geo::IGeoProgressProxy , IPrecompSystemDependencies *&)	Calculate system dependencies for a cube map.
CalculateProbeSetSystemDependencies(const IPrecompInputProbeSet , const IPrecompPackedSystem const , Geo::s32, Geo::IGeoProgressProxy , IPrecompSystemDependencies *&)	Calculate system dependencies for a probe set.
CalculateSystemDependencies(const IPrecompPackedSystem , const IPrecompPackedSystem const , Geo::s32, float, Geo::IGeoProgressProxy , IPrecompSystemDependencies *&)	Calculate system dependencies for a system.
CalculateSystemDependenciesByDistance(const IPrecompInputSystem const , Geo::s32, const IPrecompInputGeometry const , Geo::s32, float, bool, Geo::IGeoProgressProxy , IPrecompSystemsDependencies &)	Calculate dependencies for the input systems.
ClassifyInstanceAsLightmapOrProbeLit(const Geo::Matrix &, const IPrecompInputGeometry *, float, bool, float, double, eMeshClassificationLightingType &)	Decides whether a given geometry instance should be probe-lit or lightmap-lit based on how good its generated Auto UVs are.
ClassifyInstancesAsContributingProbeLit(const Geo::Matrix , const IPrecompInputGeometry const , const float , Geo::s32, float, bool *)	Decides which probe-lit instances should be contributing ("Probe Radiosity") and which should not ("Fully Dynamic") based on how much light each instance and its neighbours could block.
CompileClusteringOutput(const IPrecompSystemPreClustering , const IPrecompSystemClustering , Geo::IGeoProgressProxy , IClusteringOutput &)	Extract some data about the clustering process.
CompileCubeMap(const IPrecompOutputCubeMap , Enlighten::eSolverType, Geo::IGeoProgressProxy , IPrecompCubeMapCore *&)	Compile the data from the cube map output object into runtime format.
CompileDepthCubeMap(const IPrecompOutputCubeMap , IPrecompDepthCubeMap &)	Compile the depth data from the cube map output object.
CompileInputWorkspace(const IPrecompSystemDuster , Enlighten::eSolverType, bool, Geo::IGeoProgressProxy , InputWorkspace *&)	Compile the data from the dusters and radiosity cores into an InputWorkspace.
CompileLightTransportOutput(const IPrecompSystemLightTransport , Geo::IGeoProgressProxy , ILightTransportOutput *&)	Extract some data about the light transport process.
CompileMaterialData(const IPrecompSystemDuster , Geo::IGeoProgressProxy , ClusterAlbedoWorkspaceMaterialData *&)	Compile the data from the dusters into a ClusterAlbedoWorkspaceMaterialData.
CompileProbeSet(const IPrecompOutputProbeSet , Enlighten::eSolverType, Geo::IGeoProgressProxy , IPrecompProbeSetRadiosity *&)	Compile the data from the probeset light transport into runtime format.
CompileRadiosity(const IPrecompSystemCompressedLightTransport , Enlighten::eSolverType, Geo::IGeoProgressProxy , IPrecompSystemRadiosity *&)	Compile the data from the light transport into runtime format.
CompileRadiosityNormalTexture(const IPrecompSystemCompressedLightTransport , IPrecompRadiosityNormalTexture &)	Compile the radiosity normal texture from the light transport data.
CompressLightTransport(const IPrecompSystemLightTransport , const IPrecompSystemDuster , Geo::IGeoProgressProxy , IPrecompSystemCompressedLightTransport &)	Compress the data from the light transport into a tighter format.
CreateClustering(const IPrecompSystemPreClustering , const IPrecompPackedSystem const , Geo::s32, Geo::IGeoProgressProxy , IPrecompSystemClustering *&)	Create clustering for a system.
CreateCubeMap(const IPrecompInputCubeMap , const IPrecompSystemClustering const , Geo::s32, const IPrecompSystemPreClustering const , Geo::IGeoProgressProxy , IPrecompOutputCubeMap *&)	Run the precompute for a cube map.
CreateLightTransport(const IPrecompPackedSystem , const IPrecompPackedSystem const , Geo::s32, const IPrecompSystemClustering const , Geo::s32, Geo::IGeoProgressProxy , IPrecompSystemLightTransport *&)	Create the light transport for a system.
CreateOutputProbeOctree(const IPrecompInputProbeOctree , const IPrecompPackedSystem const , Geo::s32, Geo::IGeoProgressProxy , IPrecompOutputProbeOctree *&)	Automatically place probes within a volume, based on distance to geometry.
CreatePreClustering(const IPrecompPackedSystem , const IPrecompPackedSystem const , Geo::s32, Geo::IGeoProgressProxy , IPrecompSystemPreClustering *&)	Create pre-clustering for a system.
CreateProbeOctree(const IPrecompInputProbeOctree , const IPrecompPackedSystem const , Geo::s32, Geo::IGeoProgressProxy , IPrecompProbeOctree *&)	Automatically place probes within a volume, based on distance to geometry.
CreateProbeSet(const IPrecompInputProbeSet , const IPrecompSystemClustering const , Geo::s32, Geo::IGeoProgressProxy , IPrecompOutputProbeSet *&)	Create the spherical harmonic data for an SH probe set.
CreateSystemDusters(const IPrecompSystemClustering , const IPrecompSystemClustering const , Geo::s32, Geo::IGeoProgressProxy , IPrecompSystemDuster *&)	Create the platform-agnostic runtime input sample points.
CreateSystemDusters(const IPrecompSystemClustering , const IPrecompSystemClustering const , Geo::s32, const PointProjectionSurface , Geo::s32, const PointProjectionVersion , Geo::s32, const PointProjectionOptions , Geo::IGeoProgressProxy , IPrecompSystemDuster &)	Create the platform-agnostic runtime input sample points including versions of projected points.
CreateSystemsByVoxelisation(const IPrecompInputSystem , const IPrecompInputGeometry const , Geo::s32, float, Geo::IGeoProgressProxy , IPrecompGeneratedSystems *&)	Split the input system into automatically generated systems.
CreateSystemsByVoxelisation(const IPrecompInputSystem , const IPrecompPackedGeometry const , Geo::s32, float, Geo::IGeoProgressProxy , IPrecompGeneratedSystems *&)	Split the input system into automatically generated systems.
CreateVisibilityData(const IPrecompSystemClustering , const IPrecompSystemClustering const , Geo::s32, Geo::IGeoProgressProxy , PrecomputedVisibilityData *&)	Create precomputed visibility data for directional lights for a system.
DumpInputProbeRegion(const IPrecompInputProbeRegion , const char )	Dump debug data for a probe region.
ExtractOctreeProbeSet(const IPrecompOutputProbeOctree , Geo::s32, IPrecompInputProbeSet &)	Extract a probe set containing automatically placed probes from a probe octree.
ExtractOctreeProbeSet(const IPrecompOutputProbeOctree , Geo::s32, IPrecompInputProbeSet &, IPrecompSystemDependencies *&)	Extract a probe set containing automatically placed probes from a probe octree.
LicenseDaysRemaining()	Number of full days remaining for the set license. Returns -1 if the set license is invalid and/or outdated.
PackGeometry(const IPrecompInputGeometry , Geo::IGeoProgressProxy , IPrecompPackedGeometry *&)	Simplify and pack geometry meshes.
PackSystem(const IPrecompInputSystem , const IPrecompPackedGeometry const , Geo::s32, Geo::IGeoProgressProxy , IPrecompPackedSystem *&)	Pack systems.
ProjectGeometry(const IPrecompInputGeometry , const IPrecompPackedGeometry const , Geo::s32, Geo::IGeoProgressProxy , IPrecompPackedGeometry *&)	Project detail meshes in an pInputGeometry onto target clusters from pBaseGeometries This is guaranteed not to change the pInputGeometry and pBaseGeometries in any way, so can be done after a precompute to get new UVs for a detail mesh that was not known about when the last precompute was run.
ProjectSystem(const IPrecompInputSystem , const IPrecompInputGeometry const , Geo::s32, const IPrecompInputSystem , const IPrecompPackedGeometry const , Geo::s32, const Geo::Geo2DTransform , Geo::IGeoProgressProxy , IPrecompPackedSystem *&)	Project a system comprised entirely of detail mesh instances across another system.
Release()	Free this object that was created within the Enlighten libraries.
SetCpuGpuMode(Geo::ECpuGpuMode)	Sets the hardware mode for the Enlighten precompute.
SetCpuThreadMax(Geo::s32)	Sets the maximum number of threads that the Cpu mode will use.
SetLicense(const char *, Geo::s32)	Set the license string. Must set before any precompute action.
SetMaxConcurrentRays(Geo::s32)	Sets the total number of rays that the precompute will generate at one time. Set this only if you are concerned about memory pressure.
SetMinimumCompatibleVersion(EMinimumCompatibleVersion)	Sets the minimum version of Enlighten, precompute should generate data for (default is emcvEnlighten3).
SetStateDump(EStateDump)	Sets the level of reproduction data saved by the IPrecompute tasks.
SetStateDumpFolder(const char *)	Sets the folder that shall contain reproduction data for the IPrecompute tasks.
StitchProbeOctree(const IPrecompProbeOctree , const IPrecompProbeOctreeLayout const , Geo::s32, Geo::IGeoProgressProxy , IPrecompOutputProbeOctree *&)	Stitch one octree with others to produce an output probe octree.
ValidateBuildParameters(const IPrecompInputSystem , const IPrecompInputGeometry const , Geo::s32, bool, bool, Geo::IGeoProgressProxy )	Examine the incoming data and determine if the supplied parameters will violate memory or reasonable performance limits.
ValidateGeometryParameters(const IPrecompInputGeometry , Geo::s32 , Geo::IGeoProgressProxy *)	Examine the incoming geometry and determine if the supplied parameters violate memory and performance limits.

EMinimumCompatibleVersion

public: enum EMinimumCompatibleVersion
{
emcvEnlighten3
}

Controls if Precompute should generate data that can be used by older Enlighten run time APIs.

enumerators

emcvEnlighten3

Generate precompute data that can be consumed by Enlighten3 (and later) API.

EStateDump

public: enum EStateDump
{
esdNone,
esdInputsOnly,
esdAll
}

Controls the amount of reproduction data saved by the IPrecompute tasks.

enumerators

esdNone	Do not save any dump files.
esdInputsOnly	Save files containing the inputs provided by the user.
esdAll	Save files at the input to every task, including generated files.

virtual Geo::s32 Enlighten::IPrecompute::AssembleSystemGeometry

public: Geo::s32 AssembleSystemGeometry
(
const IPrecompInputSystem * pSystem,
const IPrecompInputGeometry *const * ppInputGeometry,
Geo::s32 numGeometries,
Geo::IGeoProgressProxy * progress,
IPrecompPackedSystem *& oSystem
)

Assemble system geometry.

If a system is going to be used as probe radiosity, then the input processing is greatly reduced (there is no need to pack the geometry and create the UV chart mappings).

Parameters

[in]	pSystem	The system to pack
[in]	ppInputGeometry	The geometry referred to (by Id) in this system's PrecompInputInstances. You may pass more geometry items than are necessary, but all Id's used in the instances must have a packed geometry available.
[in]	numGeometries	The number of packed geometry classes in the above array
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oSystem	The final packed system

virtual Geo::s32 Enlighten::IPrecompute::CalculateCubeMapSystemDependencies

public: Geo::s32 CalculateCubeMapSystemDependencies
(
const IPrecompInputCubeMap * pCubeMap,
const IPrecompPackedSystem *const * ppSystems,
Geo::s32 numSystems,
Geo::IGeoProgressProxy * progress,
IPrecompSystemDependencies *& oDependencies
)

Calculate system dependencies for a cube map.

Each IPrecompInputCubeMap may have dependencies calculated by calling this function on it. All packed systems which are fully loaded will have their geometry fully represented in the visibility tests. Packed systems which only have a header (ie whose geometry isn't loaded) will be represented by their bounding boxes in the visibility tests. (In the HLBS these sets of systems are controlled by the "expansionDistance" parameter.)

Parameters

[in]	pCubeMap	The cube map for which to calculate dependencies
[in]	ppSystems	The list of systems to include in this calculation.
[in]	numSystems	The number of packed systems in the above array
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oDependencies	The approximate set of system dependencies, which may be fed back into the precompute.

virtual Geo::s32 Enlighten::IPrecompute::CalculateProbeSetSystemDependencies

public: Geo::s32 CalculateProbeSetSystemDependencies
(
const IPrecompInputProbeSet * pProbeInput,
const IPrecompPackedSystem *const * ppSystems,
Geo::s32 numSystems,
Geo::IGeoProgressProxy * progress,
IPrecompSystemDependencies *& oDependencies
)

Calculate system dependencies for a probe set.

Each IPrecompInputProbeSet may have dependencies calculated by calling this function on it. The collection of systems passed in determines the connectivity between them, so completely isolated systems have a numSystems of 1. All packed systems which are fully loaded will have their geometry fully represented in the visibility tests. Packed systems which only have a header (ie whose geometry isn't loaded) will be represented by their bounding boxes in the visibility tests. (In the HLBS these sets of systems are controlled by the "expansionDistance" parameter.)

Parameters

[in]	pProbeInput	The probe set for which to calculate dependencies
[in]	ppSystems	The list of systems to include in this calculation.
[in]	numSystems	The number of packed systems in the above array
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oDependencies	The approximate set of system dependencies, which may be fed back into the precompute.

virtual Geo::s32 Enlighten::IPrecompute::CalculateSystemDependencies

public: Geo::s32 CalculateSystemDependencies
(
const IPrecompPackedSystem * pSystem,
const IPrecompPackedSystem *const * ppSystems,
Geo::s32 numSystems,
float rayOriginsPerPixelArea,
Geo::IGeoProgressProxy * progress,
IPrecompSystemDependencies *& oDependencies
)

Calculate system dependencies for a system.

Each IPrecompInputSystem may have dependencies calculated by calling this function on it. The collection of systems passed in determines the connectivity between them, so completely isolated systems have a numSystems of 1. All packed systems which are fully loaded will have their geometry fully represented in the visibility tests. Packed systems which only have a header (ie whose geometry isn't loaded) will be represented by their bounding boxes in the visibility tests. (In the HLBS these sets of systems are controlled by the "expansionDistance" parameter.)

Parameters

[in]	pSystem	The system for which to calculate dependencies
[in]	ppSystems	The list of systems to include in this calculation. It must include at least the system in the previous argument.
[in]	numSystems	The number of packed systems in the above array
[in]	rayOriginsPerPixelArea	Density of ray origins - i.e. num of ray origins = rayOriginsPerPixelArea * SystemWorldArea/(minSystemPixelSize^2)
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oDependencies	The approximate set of system dependencies, which may be fed back into the precompute.

virtual Geo::s32 Enlighten::IPrecompute::CalculateSystemDependenciesByDistance

public: Geo::s32 CalculateSystemDependenciesByDistance
(
const IPrecompInputSystem *const * pInputSystems,
Geo::s32 numSystems,
const IPrecompInputGeometry *const * pInputGeoms,
Geo::s32 numGeoms,
float maxDistanceInPixelSizeUnits,
bool estimateFromCentre,
Geo::IGeoProgressProxy * progress,
IPrecompSystemsDependencies *& oDependencies
)

Calculate dependencies for the input systems.

System A is dependent on system B if the centres of A and B are at a distance equal or smaller than the maxDistanceInPixelSizeUnits multiplied by the minimum pixel size of the instances in system B.

Parameters

[in]	pInputSystems	The input systems that will get their dependencies calculated.
[in]	numSystems	The number of input systems
[in]	pInputGeoms	A collection of input geometry objects, referred to by the input systems above.
[in]	numGeoms	How many entries in the pInputGeometry array.
[in]	maxDistanceInPixelSizeUnits	If system A's bounding box is closer than maxDistanceInPixelSizeUnits * (minPixelSize of system B) to system's B bounding box, than system A is dependent on system B. minPixelSize of a system is a minimal value of an output pixel size present among input instances making up that system.
[in]	estimateFromCentre	If true the distance between bounding box centres is evaluated, if false the actual distance between the bounding boxes is considered (i.e. overlapping bounding boxes have a distance of less than zero.
[in]	progress	This object is updated during this function call to give feedback on progress.
[out]	oDependencies	Dependencies for the input systems.

virtual bool Enlighten::IPrecompute::ClassifyInstanceAsLightmapOrProbeLit

public: bool ClassifyInstanceAsLightmapOrProbeLit
(
const Geo::Matrix & instanceTransform,
const IPrecompInputGeometry * pPrecompInputGeometry,
float outputPixelSize,
bool considerUserUvs,
float autoUvMaxDistanceFactor,
double autoUvTotalErrorThreshold,
eMeshClassificationLightingType & result
)

Decides whether a given geometry instance should be probe-lit or lightmap-lit based on how good its generated Auto UVs are.

This is used as part of Mesh Classification.

Parameters

[in]	instanceTransform	The matrix transform of the instance that is to be classified
[in]	pPrecompInputGeometry	The geometry used by the instance that is to be classified
[in]	outputPixelSize	The output pixel size assigned to the instance that is to be classified
[in]	considerUserUvs	Should existing user UVs on the IPrecompInputGeometry be considering when running the Auto UVs algorithm
[in]	autoUvMaxDistanceFactor	The Auto UVs algorithm used to classify the instance will use a "simpMaxDistance" (see Auto UV docs) of this factor multiplied by outputPixelSize (a good default is 0.5)
[in]	autoUvTotalErrorThreshold	The total error reported by the Auto UVs algorithm (the total overlap ratio) is thresholded against this value to determine the classification result (a good default is 0.3)
[out]	result	The result of the classification - either MCLT_PROBE for probe-lit or MCLT_LIGHTMAP for lightmap-lit.

virtual bool Enlighten::IPrecompute::ClassifyInstancesAsContributingProbeLit

public: bool ClassifyInstancesAsContributingProbeLit
(
const Geo::Matrix * pInstanceTransforms,
const IPrecompInputGeometry *const * ppInstanceGeoms,
const float * pClusterSizes,
Geo::s32 numInstances,
float densityWindowSizeFactor,
bool * pResults
)

Decides which probe-lit instances should be contributing ("Probe Radiosity") and which should not ("Fully Dynamic") based on how much light each instance and its neighbours could block.

This is used as part of Mesh Classification.

Parameters

[in]	pInstanceTransforms	The matrix transforms for each instance that is to be classified
[in]	ppInstanceGeoms	The geometries used by each instance that is to be classified
[in]	pClusterSizes	The cluster sizes assigned to each instance that is to be classified
[in]	numInstances	The number of instances to classify which should match the length of the pInstanceTransforms, ppInstanceGeoms, pClusterSizes and pResults arrays.
[in]	densityWindowSizeFactor	Specifies the size (edge length) of the window (in output pixels) in which there must be significant projected area for instances to count as contributing (a good default is 10.0)
[out]	pResults	The results of the classification - true for each instance that should be contributing, false for each instance that should not. This should be a pointer an already allocated array of booleans, of length numInstances.

virtual Geo::s32 Enlighten::IPrecompute::CompileClusteringOutput

public: Geo::s32 CompileClusteringOutput
(
const IPrecompSystemPreClustering * pPreClustering,
const IPrecompSystemClustering * pClustering,
Geo::IGeoProgressProxy * progress,
IClusteringOutput *& oClusteringOutput
)

Extract some data about the clustering process.

An optional step that gives you some information for debugging.

Parameters

[in]	pPreClustering	The preClustering interface for the clustering being processed
[in]	pClustering	The clustering being processed
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oClusteringOutput	Class containing the debugging data

virtual Geo::s32 Enlighten::IPrecompute::CompileCubeMap

public: Geo::s32 CompileCubeMap
(
const IPrecompOutputCubeMap * cubeMapOutput,
Enlighten::eSolverType targetSolver,
Geo::IGeoProgressProxy * progress,
IPrecompCubeMapCore *& oCubeMapCore
)

Compile the data from the cube map output object into runtime format.

Each IPrecompOutputCubeMap must have this function called on it per-platform

Parameters

[in]	cubeMapOutput	The cube map being processed
[in]	targetSolver	Which solver to create data for
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oCubeMapCore	Class containing the runtime cube map data

virtual Geo::s32 Enlighten::IPrecompute::CompileDepthCubeMap

public: Geo::s32 CompileDepthCubeMap
(
const IPrecompOutputCubeMap * cubeMapOutput,
IPrecompDepthCubeMap *& oDepthCubeMap
)

Compile the depth data from the cube map output object.

Each IPrecompOutputCubeMap must have this function called on it per-platform

Parameters

[in]	cubeMapOutput	The cube map being processed
[out]	oDepthCubeMap	Class containing the depth cube map data

virtual Geo::s32 Enlighten::IPrecompute::CompileInputWorkspace

public: Geo::s32 CompileInputWorkspace
(
const IPrecompSystemDuster * pDusters,
Enlighten::eSolverType targetSolver,
bool includeProjectedPointData,
Geo::IGeoProgressProxy * progress,
InputWorkspace *& oInputWorkspace
)

Compile the data from the dusters and radiosity cores into an InputWorkspace.

Parameters

[in]	pDusters	The dusters being processed
[in]	targetSolver	Which solver to create data for
[in]	includeProjectedPointData	When true, if projected point data is in the IPrecompSystemDuster object, it will be exported to the RadDataBlock m_ProjectedPointData in the InputWorkspace. False disables the export.
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oInputWorkspace	Class containing the runtime InputWorkspace

virtual Geo::s32 Enlighten::IPrecompute::CompileLightTransportOutput

public: Geo::s32 CompileLightTransportOutput
(
const IPrecompSystemLightTransport * pLightTransport,
Geo::IGeoProgressProxy * progress,
ILightTransportOutput *& oLightTransportOutput
)

Extract some data about the light transport process.

An optional step that gives you some information for debugging.

Parameters

[in]	pLightTransport	The light transport being processed
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oLightTransportOutput	Class containing the debugging data

virtual Geo::s32 Enlighten::IPrecompute::CompileMaterialData

public: Geo::s32 CompileMaterialData
(
const IPrecompSystemDuster * pDusters,
Geo::IGeoProgressProxy * progress,
ClusterAlbedoWorkspaceMaterialData *& oMaterialData
)

Compile the data from the dusters into a ClusterAlbedoWorkspaceMaterialData.

Parameters

[in]	pDusters	The dusters being processed
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oMaterialData	Class containing the ClusterAlbedoWorkspaceMaterialData

virtual Geo::s32 Enlighten::IPrecompute::CompileProbeSet

public: Geo::s32 CompileProbeSet
(
const IPrecompOutputProbeSet * pProbeSetOutput,
Enlighten::eSolverType targetSolver,
Geo::IGeoProgressProxy * progress,
IPrecompProbeSetRadiosity *& oRadiosity
)

Compile the data from the probeset light transport into runtime format.

Each IPrecompOutputProbeSet must have this function called on it per-platform

Parameters

[in]	pProbeSetOutput	The probeset being processed
[in]	targetSolver	Which solver to create data for
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oRadiosity	Class containing the runtime radiosity

virtual Geo::s32 Enlighten::IPrecompute::CompileRadiosity

public: Geo::s32 CompileRadiosity
(
const IPrecompSystemCompressedLightTransport * pLightTransport,
Enlighten::eSolverType targetSolver,
Geo::IGeoProgressProxy * progress,
IPrecompSystemRadiosity *& oRadiosity
)

Compile the data from the light transport into runtime format.

Each IPrecompSystemLightTransport must have this function called on it per-platform

Parameters

[in]	pLightTransport	The compressed light transport (ie. system) being processed
[in]	targetSolver	Which solver to create data for
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oRadiosity	Class containing the runtime radiosity

virtual Geo::s32 Enlighten::IPrecompute::CompileRadiosityNormalTexture

public: Geo::s32 CompileRadiosityNormalTexture
(
const IPrecompSystemCompressedLightTransport * pLightTransport,
IPrecompRadiosityNormalTexture *& oRadiosityNormalTexture
)

Compile the radiosity normal texture from the light transport data.

Parameters

[in]	pLightTransport	The compressed light transport (ie. system) being processed.
[out]	oRadiosityNormalTexture	Class containing the texture data.

virtual Geo::s32 Enlighten::IPrecompute::CompressLightTransport

public: Geo::s32 CompressLightTransport
(
const IPrecompSystemLightTransport * pLightTransport,
const IPrecompSystemDuster * pDusters,
Geo::IGeoProgressProxy * progress,
IPrecompSystemCompressedLightTransport *& oCompiledLightTransport
)

Compress the data from the light transport into a tighter format.

Each IPrecompSystemLightTransport must have this function called on it to reduce the data down to runtime-compatible levels.

Parameters

[in]	pLightTransport	The light transport (ie. system) being processed
[in]	pDusters	The dusters for the system being processed
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oCompiledLightTransport	Compressed data passed to CompileRadiosity

virtual Geo::s32 Enlighten::IPrecompute::CreateClustering

public: Geo::s32 CreateClustering
(
const IPrecompSystemPreClustering * pSystemPreClustering,
const IPrecompPackedSystem *const * ppOtherPackedSystems,
Geo::s32 numOtherSystems,
Geo::IGeoProgressProxy * progress,
IPrecompSystemClustering *& oClustering
)

Create clustering for a system.

Each IPrecompInputSystem must have clustering created by calling this function on it. The collection of other packed systems passed in is used for visibility determination, so any system whose geometry could affect rays cast with the system should be supplied. Typically the safest and simplest thing is to pass the same dependencies used by light transport.

Parameters

[in]	pSystemPreClustering	The pre-clustering interface for the system to cluster
[in]	ppOtherPackedSystems	The list of (other) packed systems to consider when generating this clustering. The packed system for the system to generate clustering for may be passed but will be ignored.
[in]	numOtherSystems	The number of packed systems in the above array
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oClustering	The system clustering, used by other stages

virtual Geo::s32 Enlighten::IPrecompute::CreateCubeMap

public: Geo::s32 CreateCubeMap
(
const IPrecompInputCubeMap * inputCubeMap,
const IPrecompSystemClustering *const * ppClusterings,
Geo::s32 numClusterings,
const IPrecompSystemPreClustering *const * ppPreClusterings,
Geo::IGeoProgressProxy * progress,
IPrecompOutputCubeMap *& oCubeMapOutput
)

Run the precompute for a cube map.

This function takes a description of a cube map as a IPrecompInputCubeMap and runs the precompute to produce an IPrecompOutputCubeMap. The runtime data can then be extracted from this object. This function requires a list of all systems the cube map is allowed to 'see', as an array of IPrecompSystemClustering objects. Removing systems that the cube map cannot see will make this stage faster.

Parameters

[in]	inputCubeMap	The description of the cube map to precompute
[in]	ppClusterings	The list of clusterings to assume may be visible from this cube map
[in]	numClusterings	The number of clusterings in the above array
[in]	ppPreClusterings	The list of pre-clusterings to assume may be visible from this cube map
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oCubeMapOutput	The precomputed cube map data

virtual Geo::s32 Enlighten::IPrecompute::CreateLightTransport

public: Geo::s32 CreateLightTransport
(
const IPrecompPackedSystem * pSystem,
const IPrecompPackedSystem *const * ppSystems,
Geo::s32 numSystems,
const IPrecompSystemClustering *const * ppClusterings,
Geo::s32 numClusterings,
Geo::IGeoProgressProxy * progress,
IPrecompSystemLightTransport *& oLightTransport
)

Create the light transport for a system.

Each light-mapped system must have a light transport created by calling this function on it. The clustering object for each system to be considered as input (the dependencies), whether light-mapped or not, should be passed in. These are used to determine the bounced light that a given pixel in the system of interest can see. The packed system object of each light-mapped system to be considered as input should be passed in separately. These are used to determine connectivity in light-map space, and ensure boundaries between systems are as smooth as possible.

Parameters

[in]	pSystem	The system to create light transport for
[in]	ppSystems	The list of systems to include in this light transport. It must include at least the system in the previous argument.
[in]	numSystems	The number of packed systems in the above array
[in]	ppClusterings	The list of clusterings to include in this light transport
[in]	numClusterings	The number of clusterings in the above array
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oLightTransport	The system light transport, used by CompileRadiosity

virtual Geo::s32 Enlighten::IPrecompute::CreateOutputProbeOctree

public: Geo::s32 CreateOutputProbeOctree
(
const IPrecompInputProbeOctree * pProbeInput,
const IPrecompPackedSystem *const * ppSystems,
Geo::s32 numSystems,
Geo::IGeoProgressProxy * progress,
IPrecompOutputProbeOctree *& pProbeOctree
)

Automatically place probes within a volume, based on distance to geometry.

Parameters

[in]	pProbeInput	The volume within which to generate probe positions.
[in]	ppSystems	The list of systems whose geometry will be used.
[in]	numSystems	The number of packed systems in the above array
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	pProbeOctree	The generated probe octree, from which probe sets may be extracted.

virtual Geo::s32 Enlighten::IPrecompute::CreatePreClustering

public: Geo::s32 CreatePreClustering
(
const IPrecompPackedSystem * pSystem,
const IPrecompPackedSystem *const * ppSystems,
Geo::s32 numSystems,
Geo::IGeoProgressProxy * progress,
IPrecompSystemPreClustering *& oPreClustering
)

Create pre-clustering for a system.

Each IPrecompInputSystem must have pre-clustering created by calling this function on it. The collection of systems passed in determines the connectivity between them, so completely isolated systems have a numSystems of 1.

Parameters

[in]	pSystem	The system to pre-cluster
[in]	ppSystems	The list of systems to include in this pre-clustering. It must include at least the system in the previous argument.
[in]	numSystems	The number of packed systems in the above array
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oPreClustering	The system pre-clustering, used by other stages

virtual Geo::s32 Enlighten::IPrecompute::CreateProbeOctree

public: Geo::s32 CreateProbeOctree
(
const IPrecompInputProbeOctree * pProbeInput,
const IPrecompPackedSystem *const * ppSystems,
Geo::s32 numSystems,
Geo::IGeoProgressProxy * progress,
IPrecompProbeOctree *& pProbeOctree
)

Automatically place probes within a volume, based on distance to geometry.

Parameters

[in]	pProbeInput	The volume within which to generate probe positions.
[in]	ppSystems	The list of systems whose geometry will be used.
[in]	numSystems	The number of packed systems in the above array
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	pProbeOctree	The generated probe octree, from which probe sets may be extracted.

virtual Geo::s32 Enlighten::IPrecompute::CreateProbeSet

public: Geo::s32 CreateProbeSet
(
const IPrecompInputProbeSet * pProbeSet,
const IPrecompSystemClustering *const * ppClusterings,
Geo::s32 numClusterings,
Geo::IGeoProgressProxy * progress,
IPrecompOutputProbeSet *& oProbeSetOutput
)

Create the spherical harmonic data for an SH probe set.

Each IPrecompInputProbeSet must have spherical harmonic data created by calling this function on it. The collection of clusters passed in determines the connectivity between them, so completely isolated probe sets have a numClusterings of 1.

Parameters

[in]	pProbeSet	The SH probe set definition
[in]	ppClusterings	The list of clusterings to include in this probe set
[in]	numClusterings	The number of clusterings in the above array
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oProbeSetOutput	The computed sh probe set, used by the runtime

virtual Geo::s32 Enlighten::IPrecompute::CreateSystemDusters

public: Geo::s32 CreateSystemDusters
(
const IPrecompSystemClustering * pClustering,
const IPrecompSystemClustering *const * ppClusterings,
Geo::s32 numClusterings,
Geo::IGeoProgressProxy * progress,
IPrecompSystemDuster *& oDuster
)

Create the platform-agnostic runtime input sample points.

Parameters

[in]	pClustering	The clustering (ie. system) being processed
[in]	ppClusterings	The list of clusterings to include in this Create System Dusters
[in]	numClusterings	The number of clusterings in the above array
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oDuster	Class containing the runtime input sample points

Note

There are two versions of this function. This simpler version assumes you do not want any projected point data generated. It is equivalent to calling the second function as: CreateSystemDusters(pClustering, ppClusterings, numClusterings, NULL, 0, NULL, 0, NULL, progress, oDuster);

virtual Geo::s32 Enlighten::IPrecompute::CreateSystemDusters

public: Geo::s32 CreateSystemDusters
(
const IPrecompSystemClustering * pClustering,
const IPrecompSystemClustering *const * ppClusterings,
Geo::s32 numClusterings,
const PointProjectionSurface * surfaceArray,
Geo::s32 numSurfaces,
const PointProjectionVersion * versionArray,
Geo::s32 numVersions,
const PointProjectionOptions * projectionOptions,
Geo::IGeoProgressProxy * progress,
IPrecompSystemDuster *& oDuster
)

Create the platform-agnostic runtime input sample points including versions of projected points.

This function will optionally generate alternative versions of the input sample points (duster points). If created, these will be exported via the m_ProjectedPointData RadDataBlock of the InputWorkspace runtime object when this class is compiled to a specific platform. If you do not want point projection data, you can simply pass NULLs as appropriate. There is a second version of this function which does this for you. In particular, if no versions are specified (numVersions == 0), the call will succeed and will not generate any additional data.

The m_ProjectedPointData RadDataBlock in the InputWorkspace is a collection of per-instance sets of input sample points that have been projected to the meshes provided to this call. The m_ProjectedPointData RadDataBlock is optional and will only be loaded at runtime if you provide the Enlighten::Iff::ProjectedPointsInputWorkspaceDataSection to Enlighten::ReadInputWorkspaceFromFile().

Point projection works well when projecting onto an alternative representation of the same geometry, such as a different LOD level. The geometry to project onto is provided as a set of 'surfaces', each of which consist of an IPrecompInputMesh, a transformation matrix and boolean. This is the PointProjectionSurface class. Note that only the positions and normals of the meshes are used in the projection. The set of surfaces to use is specified per-instance, per-version, with the PointProjectionVersion class.

"Versions" can be thought of as a generalisation of LODs. They are just an alternative representation for an instance, and although version IDs need to be unique per-instance, they can be any value. In particular, they do not need to start at 0, or be contiguous, or positive (e.g. -100,-1,4,5 are all fine). This function will fail and report an error if you specify the same version ID for an instance more than once. It will also fail if the m_TargetSurfaces array is 0 length, or contains invalid indices or refers to null pointers and so on, but we will accept geometry that is empty (no triangles or vertices). In this case, it is not possible to project the points so we keep their original locations and create a version entry with this data. This is redundant (the points are the same), but it allows us to handle this scenario correctly and without creating an edge case in the runtime. In particular, all versions of the points for an instance will have the same number of points in all cases.

Instances that are known by the precompute (and therefore the InputWorkspace), but do not have projected point versions explicitly created for them have zero points in the resulting RadDataBlock. See the runtime API for further details.

The projection code will find the closest position on the specified geometry for each duster point. But it can also attempt to find a better position in front of itself, along its normal, if this helps it sit on top of nearby obscuring geometry. This can help prevent points being hidden under small details. This behaviour is optional and disabled if maxRayIntersectionDistance in the PointProjectionOptions class is 0 or negative. (Default is 0.)

The ppClusterings array of dependent clusterings is used to correctly determine transparency offsets per cluster, it has to contain the pClustering system.

virtual Geo::s32 Enlighten::IPrecompute::CreateSystemsByVoxelisation

public: Geo::s32 CreateSystemsByVoxelisation
(
const IPrecompInputSystem * pInputSystem,
const IPrecompInputGeometry *const * pInputGeoms,
Geo::s32 numGeoms,
float voxelSizeInPixelSizeUnits,
Geo::IGeoProgressProxy * progress,
IPrecompGeneratedSystems *& oSystems
)

Split the input system into automatically generated systems.

Note that instances which have terrain geometry will always be automatically grouped into a different system than regular instances.

Parameters

[in]	pInputSystem	The input system that will be split.
[in]	pInputGeoms	A collection of input geometry objects, referred to by the above.
[in]	numGeoms	How many entries in the pInputGeoms array.
[in]	voxelSizeInPixelSizeUnits	Size of a voxel in pixelSize units. If input geometries (pInputGeoms) have different pixelSizes than the minimum one is used. All instances whose bounding box centre falls into the same voxel are grouped into one system.
[in]	progress	This object is updated during this function call to give feedback on progress.
[out]	oSystems	Details about the instances in each system.

virtual Geo::s32 Enlighten::IPrecompute::CreateSystemsByVoxelisation

public: Geo::s32 CreateSystemsByVoxelisation
(
const IPrecompInputSystem * pInputSystem,
const IPrecompPackedGeometry *const * pPackedGeoms,
Geo::s32 numGeoms,
float voxelSizeInPixelSizeUnits,
Geo::IGeoProgressProxy * progress,
IPrecompGeneratedSystems *& oSystems
)

Split the input system into automatically generated systems.

Note that terrain instances will always be automatically grouped into a different system than non-terrain instances. This version of the function takes a collection of packed geometry objects allowing it to check that each system generated will pack. The instances in a generated system that would fail to pack using the provided voxel size are split into sub-voxels, ensuring valid systems are always generated.

Parameters

[in]	pInputSystem	The input system that will be split.
[in]	pPackedGeoms	A collection of packed geometry objects, referred to by the above.
[in]	numGeoms	How many entries in the pPackedGeoms array.
[in]	voxelSizeInPixelSizeUnits	Size of a voxel in pixelSize units. If input geometries (pInputGeoms) have different pixelSizes than the minimum one is used. All instances whose bounding box centre falls into the same voxel are grouped into one system.
[in]	progress	This object is updated during this function call to give feedback on progress.
[out]	oSystems	Details about the instances in each system.

virtual Geo::s32 Enlighten::IPrecompute::CreateVisibilityData

public: Geo::s32 CreateVisibilityData
(
const IPrecompSystemClustering * thisClustering,
const IPrecompSystemClustering *const * allClusterings,
Geo::s32 numClusterings,
Geo::IGeoProgressProxy * progress,
PrecomputedVisibilityData *& oVisibility
)

Create precomputed visibility data for directional lights for a system.

Parameters

[in]	thisClustering	The clusterings for the system to precompute visibility for
[in]	allClusterings	The clusterings for all systems to be included in the visibility computation.
[in]	numClusterings	The number of clusterings in the above array
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oVisibility	The computed visibility, used by the runtime

virtual void Enlighten::IPrecompute::DumpInputProbeRegion

public: void DumpInputProbeRegion
(
const IPrecompInputProbeRegion * pProbeRegion,
const char * name
)

Dump debug data for a probe region.

Parameters

[in]	pProbeRegion	The region for which to dump debug data.
[in]	name	The unique name of the region, used to construct the filename.

virtual Geo::s32 Enlighten::IPrecompute::ExtractOctreeProbeSet

public: Geo::s32 ExtractOctreeProbeSet
(
const IPrecompOutputProbeOctree * pProbeOctree,
Geo::s32 probeSetIndex,
IPrecompInputProbeSet *& pProbeSet
)

Extract a probe set containing automatically placed probes from a probe octree.

The build parameters for the extracted probe set are taken from the octree.

Parameters

[in]	pProbeOctree	The probe octree from which to extract a probe set.
[in]	probeSetIndex	The index of the probe set within the probe octree.
[out]	pProbeSet	The extracted probe positions, which may be fed back into the precompute.

virtual Geo::s32 Enlighten::IPrecompute::ExtractOctreeProbeSet

public: Geo::s32 ExtractOctreeProbeSet
(
const IPrecompOutputProbeOctree * pProbeOctree,
Geo::s32 probeSetIndex,
IPrecompInputProbeSet *& pProbeSet,
IPrecompSystemDependencies *& pDependencies
)

Extract a probe set containing automatically placed probes from a probe octree.

The build parameters for the extracted probe set are taken from the octree.

Parameters

[in]	pProbeOctree	The probe octree from which to extract a probe set.
[in]	probeSetIndex	The index of the probe set within the probe octree.
[out]	pProbeSet	The extracted probe positions, which may be fed back into the precompute.
[out]	pDependencies	The extracted system dependencies, which may be fed back into the precompute.

virtual Geo::s32 Enlighten::IPrecompute::LicenseDaysRemaining

public: Geo::s32 LicenseDaysRemaining()

Number of full days remaining for the set license. Returns -1 if the set license is invalid and/or outdated.

virtual Geo::s32 Enlighten::IPrecompute::PackGeometry

public: Geo::s32 PackGeometry
(
const IPrecompInputGeometry * pGeometry,
Geo::IGeoProgressProxy * progress,
IPrecompPackedGeometry *& oGeometry
)

Simplify and pack geometry meshes.

Each IPrecompInputGeometry must be analysed and packed by calling this function on it.

Parameters

[in]	pGeometry	The geometry to simplify and pack
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oGeometry	The final packed geometry

Returns

Returns 0 if successful, otherwise an integer which can be interpreted as a GeometryBuildResult. More detailed error information can be collected by implementing the ReportError() method of the IGeoProgressProxy object.

virtual Geo::s32 Enlighten::IPrecompute::PackSystem

public: Geo::s32 PackSystem
(
const IPrecompInputSystem * pSystem,
const IPrecompPackedGeometry *const * ppPackedGeometry,
Geo::s32 numGeometries,
Geo::IGeoProgressProxy * progress,
IPrecompPackedSystem *& oSystem
)

Pack systems.

Each IPrecompInputSystem must be packed by calling this function on it.

Parameters

[in]	pSystem	The system to pack
[in]	ppPackedGeometry	The geometry referred to (by Id) in this system's PrecompInputInstances. You may pass more geometry items than are necessary, but all Id's used in the instances must have a packed geometry available.
[in]	numGeometries	The number of packed geometry classes in the above array
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oSystem	The final packed system

Returns

Returns zero if successful, non-zero if an error occurred. More detailed error information can be collected by implementing the ReportError() method of the IGeoProgressProxy object.

virtual Geo::s32 Enlighten::IPrecompute::ProjectGeometry

public: Geo::s32 ProjectGeometry
(
const IPrecompInputGeometry * pInputGeometry,
const IPrecompPackedGeometry *const * pBaseGeometries,
Geo::s32 numBaseGeoms,
Geo::IGeoProgressProxy * progress,
IPrecompPackedGeometry *& oGeometry
)

Project detail meshes in an pInputGeometry onto target clusters from pBaseGeometries This is guaranteed not to change the pInputGeometry and pBaseGeometries in any way, so can be done after a precompute to get new UVs for a detail mesh that was not known about when the last precompute was run.

Parameters

[in]	pInputGeometry	The geometry to project (must contain only detail meshes)
[in]	pBaseGeometries	An array of packed geometries to project onto
[in]	numBaseGeoms	Number of geometries in pBaseGeometries
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oGeometry	The projected geometry.

virtual Geo::s32 Enlighten::IPrecompute::ProjectSystem

public: Geo::s32 ProjectSystem
(
const IPrecompInputSystem * pProjectedSystem,
const IPrecompInputGeometry *const * ppProjSysGeoms,
Geo::s32 numProjSysGeometries,
const IPrecompInputSystem * pTargetSystem,
const IPrecompPackedGeometry *const * ppTargetSysGeoms,
Geo::s32 numTargetSysGeometries,
const Geo::Geo2DTransform * pTargetUvTransforms,
Geo::IGeoProgressProxy * progress,
IPrecompPackedSystem *& oSystem
)

Project a system comprised entirely of detail mesh instances across another system.

Parameters

[in]	pProjectedSystem	The system to project.
[in]	ppProjSysGeoms	The geometry referred to (by Id) in this projected system's PrecompInputInstances.
[in]	numProjSysGeometries	The number of input geometry objects in the ppProjSysGeoms array.
[in]	pTargetSystem	The system to project onto.
[in]	ppTargetSysGeoms	The geometry referred to in the target system's PrecompInputInstances.
[in]	numTargetSysGeometries	The number of packed geometry classes in the above array
[in]	pTargetUvTransforms	The UV transforms obtained from the result of packing the system - one UV Transform for each instance in the target system.
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	oSystem	The final projected system. The UV projection information is stored in the IPrecompPackedInstances.

virtual void Geo::IGeoReleasable::Release

public: void Release()

Free this object that was created within the Enlighten libraries.

Expect this to behave in a similar way to calling 'delete(this)'

virtual void Enlighten::IPrecompute::SetCpuGpuMode

public: void SetCpuGpuMode
(
Geo::ECpuGpuMode mode
)

Sets the hardware mode for the Enlighten precompute.

virtual void Enlighten::IPrecompute::SetCpuThreadMax

public: void SetCpuThreadMax
(
Geo::s32 maxThreads
)

Sets the maximum number of threads that the Cpu mode will use.

virtual bool Enlighten::IPrecompute::SetLicense

public: bool SetLicense
(
const char * licenseData,
Geo::s32 licenseLength
)

Set the license string. Must set before any precompute action.

virtual void Enlighten::IPrecompute::SetMaxConcurrentRays

public: void SetMaxConcurrentRays
(
Geo::s32 totalRays
)

Sets the total number of rays that the precompute will generate at one time. Set this only if you are concerned about memory pressure.

virtual void Enlighten::IPrecompute::SetMinimumCompatibleVersion

public: void SetMinimumCompatibleVersion
(
EMinimumCompatibleVersion minimumVersion
)

Sets the minimum version of Enlighten, precompute should generate data for (default is emcvEnlighten3).

virtual void Enlighten::IPrecompute::SetStateDump

public: void SetStateDump
(
EStateDump state
)

Sets the level of reproduction data saved by the IPrecompute tasks.

virtual bool Enlighten::IPrecompute::SetStateDumpFolder

public: bool SetStateDumpFolder
(
const char * folder
)

Sets the folder that shall contain reproduction data for the IPrecompute tasks.

virtual Geo::s32 Enlighten::IPrecompute::StitchProbeOctree

public: Geo::s32 StitchProbeOctree
(
const IPrecompProbeOctree * probeOctree,
const IPrecompProbeOctreeLayout *const * otherLayouts,
Geo::s32 otherCount,
Geo::IGeoProgressProxy * progress,
IPrecompOutputProbeOctree *& outputOctree
)

Stitch one octree with others to produce an output probe octree.

Parameters

[in]	probeOctree	The probe octree to be stitched.
[in]	otherLayouts	The set of other octree layouts that may overlap.
[in]	otherCount	The number of entries in the above array.
[in]	progress	This object is updated during this function call to give feedback on progress
[out]	outputOctree	The stitched output probe octree.

virtual Geo::s32 Enlighten::IPrecompute::ValidateBuildParameters

public: Geo::s32 ValidateBuildParameters
(
const IPrecompInputSystem * pSystem,
const IPrecompInputGeometry *const * ppGeometry,
Geo::s32 numGeometries,
bool estimateNumOutputPixels,
bool estimateNumClusters,
Geo::IGeoProgressProxy * progress
)

Examine the incoming data and determine if the supplied parameters will violate memory or reasonable performance limits.

Parameters

[in]	pSystem	The system to validate.
[in]	ppGeometry	The geometry referred to (by Id) in this system's PrecompInputInstances. You may pass more geometry items than are necessary
[in]	numGeometries	The number of input geometry classes in the above array
[in]	estimateNumOutputPixels	True if the estimated number of output pixels that the system will require should be estimated and validated, false if not.
[in]	estimateNumClusters	True if the estimated number of clusters that the system will require should be estimated and validated, false if not.
[in]	progress	This object is updated during this function call to give feedback on progress

Returns

Returns zero if successful, non-zero if the validation fails. Please refer to the errors reported via the ReportError() method of the IGeoProgressProxy object for details.

virtual Geo::s32 Enlighten::IPrecompute::ValidateGeometryParameters

public: Geo::s32 ValidateGeometryParameters
(
const IPrecompInputGeometry * pGeometry,
Geo::s32 * oOutputPixelLowerBound,
Geo::IGeoProgressProxy * progress
)

Examine the incoming geometry and determine if the supplied parameters violate memory and performance limits.

This function will compute a lower bound on the number of output pixels, based on the surface area of the geometry and its output pixel size. If this lower bound exceeds the maximum size of a system then the function will fail. This is only intended as a sanity check, to catch the case where the output pixel size mismatches the geometry by order(s) of magnitude.

Parameters

[in]	pGeometry	The geometry to validate.
[in]	oOutputPixelLowerBound	Optional pointer to receive the lower bound on the number of pixels as output, if required.
[in]	progress	This object is updated during this function call to give feeback on progress

Returns

0 on success, non-zero if the validation fails.