Classes
| Name | Description |
|---|---|
| Geo::GeoBufferedFileStream | Simple IGeoStream implementation that saves/loads data into/from memory and performs all read/write operations on this copy. |
| Geo::GeoFileStream | Simple IGeoStream implementation that saves/loads data from a file. |
| Geo::GeoMemoryStream | Simple IGeoStream implementation that saves/loads data to a block of memory. |
| Geo::GeoZLibFileStream | IGeoStream implementation that saves/loads data from a zlib compressed file. |
| Geo::IffReader | An IffReader allows you to use an IGeoStream to read Iff format binary files easily. |
| Geo::IffWriter | An IffWriter allows you to use an IGeoStream to create Iff format binary files easily. |
| Geo::IGeoInputStream | An IGeoInputStream allows you to read memory/files in a consistent manner, and is an extension point for users wishing to control where data is stored. |
| Geo::IGeoReleasable | A class implementing IGeoReleasable is usually created by the Enlighten libraries and so must have Release() called in order to return the memory. |
| Geo::IGeoSerialisable | A class implementing IGeoSerialisable adds the ability to save and load instances of the type from an IGeoStream. |
| Geo::IGeoStream | An IGeoStream allows you to read/write memory/files in a consistent manner, and is an extension point for users wishing to control where data is stored. |
| Geo::WriteRangePolicy | Policy to write pointers as a range with the given element count. |
| Geo::ZeroedPadding | Defines an N-byte block of padding which is zeroed on construction. |
Functions
| Name | Description |
|---|---|
| ~GeoZLibFileStream() | Closes current file, if open. |
| CheckPaddingZeroed(const T &) | Checks if the given object has all it's 'padding' fields set to zero. |
| Close() | Close current file, if any. |
| Compatibility_ReadWideString(IffReader &, GeoString< char > &, Geo::s32) | Read a type that used to be GeoString<wchar_t>, and is now GeoString<char> |
| CompressStream(GeoMemoryStream &, GeoMemoryStream &) | Compress the input stream with the ZLib library, placing the result in the output stream. |
| CopyStreamToStream(IGeoStream &, GeoMemoryStream &) | Copy the contents of the source IGeoStream (src) to the destination GeoMemoryStream (dst). |
| GeoZLibFileStream() | Create with no attached file. |
| GetFilename() | Return the filename with which this stream was opened (not available if created with FILE*) |
| GetPosition() | Return the position of the read/write pointer within the stream (prototype matches ftell) |
| IsEof() | Is the read/write pointer at the end of the file (as with feof, only returns true if you have read past end) |
| IsOk() | Tests if the stream is valid. |
| LoadInterface(const char *, u32, bool) | Load a Precompute interface from disk, using the given filename. |
| LoadInterface(IGeoInputStream &, u32) | Load an Interface object from a stream. Interface must have same functional API as an IGeoSerialisable. |
| LoadInterfaceCompressed(const char *, u32, bool) | Load an IGeoSerialisable interface from disk, using the given compressed or uncompressed file. |
| MakeFileStream(const char *, IGeoStream::EStreamMode, GeoFileStream::EStreamFormat) | Factory method to create appropriate file stream like object. |
| Open(char const *, EStreamMode) | Close current file, if any, and open filename. |
| Read(void *, size_t, size_t) | Read data (prototype matches fread). Prefer to use the templated Read methods. |
| ReadArray(IGeoInputStream &, GeoArray< T > &) | Helper function to read a GeoArray from an IGeoInputStream, with all memory issues monitored and errors reported to GeoPrintf. |
| ReadMap(IGeoInputStream &, GeoMap< K, T > &) | Helper function to read a GeoMap from an IGeoInputStream, with all memory issues monitored and errors reported to GeoPrintf. |
| ReadObject(IGeoInputStream &, Geo::GeoArray< T > &) | ReadObject adapter for ReadArray. |
| ReadObject(Reader &, T &) | default implementation of overloadable reader function |
| ReadObject(IGeoInputStream &, bool &) | Ensure that boolean values are read/written 'efficiently' and portably. |
| SaveInterface(const Interface *, const char *, Geo::u32) | Save an IGeoSerialisable interface to disk, using the given filename. |
| SaveInterfaceCompressed(const Interface *, const char *, Geo::u32) | Save an IGeoSerialisable interface to disk in compressed format, using the given filename. |
| SaveInterfaceIfChanged(const Interface *, const char *, Geo::u32) | Save an IGeoSerialisable interface to disk, using the given filename. |
| SetPosition(u64) | Set the position of the read/write pointer within the stream (prototype matches fseek) |
| UncompressStream(GeoMemoryStream &, GeoMemoryStream &) | Uncompress a stream created by the CompressStream function above into a new stream. |
| Write(TIter, TIter) | Write a collection of objects, in range [begin, end) as STL-style classes support. |
| Write(const void *, size_t, size_t) | Write data (prototype matches fwrite). Prefer to use the templated Write methods. |
| Write(const T &) | Write a single object, returning true on success. |
| WriteArray(IGeoStream &, const GeoArray< T > &) | Helper function to write a GeoArray to an IGeoStream. Deals with arrays of values. |
| WriteArray(IGeoStream &, const GeoImmutableArray< T > &) | Helper function to write a GeoImmutableArray to an IGeoStream. Deals with arrays of values. |
| WriteArray(IGeoStream &, const GeoArray< T * > &) | Helper function to write a GeoArray to an IGeoStream. |
| WriteArrayImpl(Writer &, const T *, const T *) | Write an array to the stream. |
| WriteFileIfChanged(GeoMemoryStream &, const char *) | Save a GeoMemoryStream to disk, modifying the file only if the contents change (or the file didn't exist). |
| WriteMap(IGeoStream &, const GeoMap< K, T > &) | Helper function to write a GeoMap to an IGeoStream. |
| WriteObject(IGeoStream &, const Geo::GeoArray< T > &) | WriteObject adapter for WriteArray. |
| WriteObject(IGeoStream &, const Geo::GeoImmutableArray< T > &) | WriteObject adapter for WriteArray. |
| WriteObject(IGeoStream &, ArrayRange< T >) | Write a blittable range object to the stream. |
| WriteObject(IGeoStream &, bool const &) | Ensure that boolean values are read/written 'efficiently' and portably. |
| WriteObject(IGeoStream &, const Geo::GeoPair< T1, T2 > &) | Write a GeoPair that is not blittable because it contains padding. |
| WriteObject(Writer &, const T &) | default implementation of overloadable writer function |
| WriteProperty(Geo::IGeoStream &, const char *, const T &, bool) | Write a blittable property. |
| WriteProperty(IGeoStream &, const char *, ArrayRange< T >) | Write a range property to the stream. |
| WriteRange(IGeoStream &, Iterator, Iterator) | Write a range property to the stream. |
| WriteRange(IGeoStream &, ArrayRange< T >) | Write a blittable range object to the stream. |
| WriteRangeImpl(Writer &, const T *, const T *, GeoStd::FalseType) | Write a non-blittable range to the stream. |
| Anchor | ||||
|---|---|---|---|---|
|
Geo::GeoZLibFileStream::~GeoZLibFileStream
...
public: ~GeoZLibFileStream()
...
Closes current file, if open.
| Anchor | ||||
|---|---|---|---|---|
|
void Geo::CheckPaddingZeroed
...
public: void CheckPaddingZeroed
(
const T & object
)
...
Checks if the given object has all it's 'padding' fields set to zero.
Padding fields are identified by their name.
| Anchor | ||||
|---|---|---|---|---|
|
bool Geo::GeoZLibFileStream::Close
...
public: bool Close()
...
Close current file, if any.
| Anchor | ||||
|---|---|---|---|---|
|
bool Geo::Compatibility_ReadWideString
...
public: bool Compatibility_ReadWideString
(
IffReader & reader,
GeoString< char > & object,
Geo::s32 lastWideVersion
)
...
Read a type that used to be GeoString<wchar_t>, and is now GeoString<char>
| Anchor | ||||
|---|---|---|---|---|
|
bool GEO_CALL Geo::CompressStream
...
public: bool GEO_CALL CompressStream
(
GeoMemoryStream & input,
GeoMemoryStream & output
)
...
Compress the input stream with the ZLib library, placing the result in the output stream.
| Anchor | ||||
|---|---|---|---|---|
|
bool GEO_CALL Geo::CopyStreamToStream
...
public: bool GEO_CALL CopyStreamToStream
(
IGeoStream & src,
GeoMemoryStream & dst
)
...
Copy the contents of the source IGeoStream (src) to the destination GeoMemoryStream (dst).
| Anchor | ||||
|---|---|---|---|---|
|
Geo::GeoZLibFileStream::GeoZLibFileStream
...
public: GeoZLibFileStream()
...
Create with no attached file.
| Anchor | ||||
|---|---|---|---|---|
|
const char * Geo::GeoZLibFileStream::GetFilename
...
public: const char * GetFilename() const
...
Return the filename with which this stream was opened (not available if created with FILE*)
| Anchor | ||||
|---|---|---|---|---|
|
u64 Geo::GeoZLibFileStream::GetPosition
...
public: virtual u64 GetPosition() const
...
Return the position of the read/write pointer within the stream (prototype matches ftell)
| Anchor | ||||
|---|---|---|---|---|
|
bool Geo::GeoZLibFileStream::IsEof
...
public: virtual bool IsEof() const
...
Is the read/write pointer at the end of the file (as with feof, only returns true if you have read past end)
| Anchor | ||||
|---|---|---|---|---|
|
bool Geo::GeoZLibFileStream::IsOk
...
public: virtual bool IsOk() const
...
Tests if the stream is valid.
| Anchor | ||||
|---|---|---|---|---|
|
Interface* Geo::LoadInterface
...
public: Interface * LoadInterface
(
const char * filename,
u32 section,
bool warnError
)
...
Load a Precompute interface from disk, using the given filename.
| Anchor | ||||
|---|---|---|---|---|
|
Interface* Geo::LoadInterface
...
public: Interface * LoadInterface
(
IGeoInputStream & stream,
u32 section
)
...
Load an Interface object from a stream. Interface must have same functional API as an IGeoSerialisable.
| Anchor | ||||
|---|---|---|---|---|
|
Interface * Geo::LoadInterfaceCompressed
...
public: Interface * LoadInterfaceCompressed
(
const char * filename,
u32 section,
bool warnError
)
...
Load an IGeoSerialisable interface from disk, using the given compressed or uncompressed file.
| Anchor | ||||
|---|---|---|---|---|
|
IGeoStream* Geo::MakeFileStream
...
public: IGeoStream * MakeFileStream
(
const char * filename,
IGeoStream::EStreamMode mode,
GeoFileStream::EStreamFormat format
)
...
Factory method to create appropriate file stream like object.
| Anchor | ||||
|---|---|---|---|---|
|
bool Geo::GeoZLibFileStream::Open
...
public: bool Open
(
char const * filename,
EStreamMode mode
)
...
Close current file, if any, and open filename.
| Anchor | ||||
|---|---|---|---|---|
|
size_t Geo::GeoZLibFileStream::Read
...
public: virtual size_t Read
(
void * pData,
size_t size,
size_t count
)
...
Read data (prototype matches fread). Prefer to use the templated Read methods.
| Anchor | ||||
|---|---|---|---|---|
|
bool Geo::ReadArray
...
public: bool ReadArray
(
IGeoInputStream & reader,
GeoArray< T > & objects
)
...
Helper function to read a GeoArray from an IGeoInputStream, with all memory issues monitored and errors reported to GeoPrintf.
Deals with arrays of values, the contained type must be considered blittable (see IsBlittable<T>).
| Anchor | ||||
|---|---|---|---|---|
|
bool Geo::ReadMap
...
public: bool ReadMap
(
IGeoInputStream & reader,
GeoMap< K, T > & map
)
...
Helper function to read a GeoMap from an IGeoInputStream, with all memory issues monitored and errors reported to GeoPrintf.
Deals with arrays of values, the contained type must be considered blittable (see IsBlittable<T>).
| Anchor | ||||
|---|---|---|---|---|
|
void Geo::ReadObject
...
public: void ReadObject
(
IGeoInputStream & reader,
Geo::GeoArray< T > & objects
)
...
ReadObject adapter for ReadArray.
| Anchor | ||||
|---|---|---|---|---|
|
void Geo::ReadObject
...
public: void ReadObject
(
Reader & ,
T &
)
...
default implementation of overloadable reader function
| Anchor | ||||
|---|---|---|---|---|
|
void Geo::ReadObject
...
public: void ReadObject
(
IGeoInputStream & stream,
bool & object
)
...
Ensure that boolean values are read/written 'efficiently' and portably.
| Anchor | ||||
|---|---|---|---|---|
|
bool Geo::SaveInterface
...
public: bool SaveInterface
(
const Interface * pInterface,
const char * filename,
Geo::u32 section
)
...
Save an IGeoSerialisable interface to disk, using the given filename.
| Anchor | ||||
|---|---|---|---|---|
|
bool Geo::SaveInterfaceCompressed
...
public: bool SaveInterfaceCompressed
(
const Interface * pInterface,
const char * filename,
Geo::u32 section
)
...
Save an IGeoSerialisable interface to disk in compressed format, using the given filename.
| Anchor | ||||
|---|---|---|---|---|
|
bool Geo::SaveInterfaceIfChanged
...
public: bool SaveInterfaceIfChanged
(
const Interface * pInterface,
const char * filename,
Geo::u32 section
)
...
Save an IGeoSerialisable interface to disk, using the given filename.
| Anchor | ||||
|---|---|---|---|---|
|
bool Geo::GeoZLibFileStream::SetPosition
...
public: virtual bool SetPosition
(
u64 pos
)
...
Set the position of the read/write pointer within the stream (prototype matches fseek)
| Anchor | ||||
|---|---|---|---|---|
|
bool GEO_CALL Geo::UncompressStream
...
public: bool GEO_CALL UncompressStream
(
GeoMemoryStream & input,
GeoMemoryStream & output
)
...
Uncompress a stream created by the CompressStream function above into a new stream.
| Anchor | ||||
|---|---|---|---|---|
|
bool Geo::IGeoStream::Write
...
public: bool Write
(
TIter begin,
TIter end
)
...
Write a collection of objects, in range [begin, end) as STL-style classes support.
Objects have same requirements single object Write (see IsBlittable<T>).
| Anchor | ||||
|---|---|---|---|---|
|
size_t Geo::GeoZLibFileStream::Write
...
public: virtual size_t Write
(
const void * pData,
size_t size,
size_t count
)
...
Write data (prototype matches fwrite). Prefer to use the templated Write methods.
| Anchor | ||||
|---|---|---|---|---|
|
GEO_FORCE_INLINE bool Geo::IGeoStream::Write
...
public: GEO_FORCE_INLINE bool Write
(
const T & object
)
...
Write a single object, returning true on success.
There must either be a WriteObject overload for T, or T must be blittable (see IsBlittable<T>).
| Anchor | ||||
|---|---|---|---|---|
|
bool Geo::WriteArray
...
public: bool WriteArray
(
IGeoStream & writer,
const GeoArray< T > & objects
)
...
Helper function to write a GeoArray to an IGeoStream. Deals with arrays of values.
| Anchor | ||||
|---|---|---|---|---|
|
bool Geo::WriteArray
...
public: bool WriteArray
(
IGeoStream & writer,
const GeoImmutableArray< T > & objects
)
...
Helper function to write a GeoImmutableArray to an IGeoStream. Deals with arrays of values.
| Anchor | ||||
|---|---|---|---|---|
|
bool Geo::WriteArray
...
public: bool WriteArray
(
IGeoStream & writer,
const GeoArray< T * > & objects
)
...
Helper function to write a GeoArray to an IGeoStream.
Deals with arrays of pointers, the storage type must implement IGeoSerialisable (or at least have same function prototype)
| Anchor | ||||
|---|---|---|---|---|
|
bool Geo::WriteArrayImpl
...
public: bool WriteArrayImpl
(
Writer & writer,
const T * first,
const T * last
)
...
Write an array to the stream.
| Anchor | ||||
|---|---|---|---|---|
|
bool GEO_CALL Geo::WriteFileIfChanged
...
public: bool GEO_CALL WriteFileIfChanged
(
GeoMemoryStream & ms,
const char * filename
)
...
Save a GeoMemoryStream to disk, modifying the file only if the contents change (or the file didn't exist).
| Anchor | ||||
|---|---|---|---|---|
|
bool Geo::WriteMap
...
public: bool WriteMap
(
IGeoStream & writer,
const GeoMap< K, T > & map
)
...
Helper function to write a GeoMap to an IGeoStream.
Deals with arrays of values, the contained type must be considered blittable (see IsBlittable<T>).
| Anchor | ||||
|---|---|---|---|---|
|
void Geo::WriteObject
...
public: void WriteObject
(
IGeoStream & writer,
const Geo::GeoArray< T > & objects
)
...
WriteObject adapter for WriteArray.
| Anchor | ||||
|---|---|---|---|---|
|
void Geo::WriteObject
...
public: void WriteObject
(
IGeoStream & writer,
const Geo::GeoImmutableArray< T > & objects
)
...
WriteObject adapter for WriteArray.
| Anchor | ||||
|---|---|---|---|---|
|
void Geo::WriteObject
...
public: void WriteObject
(
IGeoStream & stream,
ArrayRange< T > range
)
...
Write a blittable range object to the stream.
| Anchor | ||||
|---|---|---|---|---|
|
void Geo::WriteObject
...
public: void WriteObject
(
IGeoStream & stream,
bool const & object
)
...
Ensure that boolean values are read/written 'efficiently' and portably.
| Anchor | ||||
|---|---|---|---|---|
|
void Geo::WriteObject
...
public: void WriteObject
(
IGeoStream & stream,
const Geo::GeoPair< T1, T2 > & p
)
...
Write a GeoPair that is not blittable because it contains padding.
| Anchor | ||||
|---|---|---|---|---|
|
void Geo::WriteObject
...
public: void WriteObject
(
Writer & ,
const T &
)
...
default implementation of overloadable writer function
| Anchor | ||||
|---|---|---|---|---|
|
void Geo::WriteProperty
...
public: void WriteProperty
(
Geo::IGeoStream & stream,
const char * name,
const T & value,
bool isFlaky
)
...
Write a blittable property.
| Anchor | ||||
|---|---|---|---|---|
|
void Geo::WriteProperty
...
public: void WriteProperty
(
IGeoStream & stream,
const char * name,
ArrayRange< T > range
)
...
Write a range property to the stream.
| Anchor | ||||
|---|---|---|---|---|
|
void Geo::WriteRange
...
public: void WriteRange
(
IGeoStream & stream,
Iterator first,
Iterator last
)
...
Write a range property to the stream.
| Anchor | ||||
|---|---|---|---|---|
|
void Geo::WriteRange
...
public: void WriteRange
(
IGeoStream & stream,
ArrayRange< T > range
)
...
Write a blittable range object to the stream.
| Anchor | ||||
|---|---|---|---|---|
|
bool Geo::WriteRangeImpl
...
public: bool WriteRangeImpl
(
Writer & writer,
const T * first,
const T * last,
GeoStd::FalseType isBlittable
)
...
Write a non-blittable range to the stream.
Write a blittable range to the stream.