Overview

GeoViewer is a simple viewing application for the .scene file format used by the High Level Build System and GeoRadiosity. It is used mostly for internal tests to verify that the Enlighten run-time runs on all supported platforms.

GeoViewer is a testing and debugging tool, and does not provide a good example of how to use Enlighten in your game engine.

Usage

GeoViewer must be supplied with a .scene file via command line options. The options are:

-scene <scene> (note the space). Load scene <scene>. The scene must have been precomputed in advance, for example by using GeoRadiosity.
-lights <lights> (again, note the space). Load light description <lights>. If not specified, GeoViewer looks for a file named <scene>default.lights located alongside the __Build<scene>__ folder that is generated by the Enlighten precompute.
-backend <backend> (again, note the space). Only used on Windows, as this is the only platform with more than one backend. Possible settings are DX9 (default), DX11, and GL.

Example (Windows): GeoViewer.exe -scene MyScene.scene -lights MyLights.lights -backend DX11

Example (OS X): GeoViewer.app/Contents/MacOS/GeoViewer -scene MyScene.scene -lights MyLights.lights

If GeoViewer displays a red window when started, the scene could not be loaded. Make sure the scene has been precomputed.

Once started, you can navigate with the gamepad, or with the mouse and W, A, S, D and F and V.

Command line options

-solvetype

Value	Feature	Platforms	Dependencies
`irradianceonly`	Computes only the irradiance texture	All	None
`directionalirradiance`	Computes the irradiance and an additional directional texture	All	None
`directionalirradiancergb`	Computes the irradiance and three additional textures for red, green and blue directional data	PC, OS X, Linux, PS4, Xbox One, iOS, Android	None

`-loadrefdata`

Loads reference radiosity data in order to compute Enlighten output using reference implementations of the system and probe solvers. If this option is not set, Enlighten uses platform-optimised solver code.

Feature	Platforms	Dependencies
Load reference radiosity data and use reference solvers	All	None

`-precision`

Determines the input precision. If this option is not set, GeoViewer uses full precision.

Value	Feature	Platforms	Dependencies
`full`	Full precision input lighting	All	`None`
`half`	Half precision input lighting	All	None

`-enlightenonly`

Shows just the output of Enlighten (indirect lighting and specular cube map lighting) with no direct lighting. This is mainly used for testing, and on mobile platforms where the direct light rendering is currently extremely limited. It is also useful for direct comparison and verification on the PC.

Feature	Platforms	Dependencies
Render only Enlighten output	All	None

`-port`

The listening port for network messages (default 6100).

`-outputformat`

Specifies the Enlighten irradiance output texture format. See Output formats.

Value	Feature	Platforms	Dependencies
`fp16`	16-bits-per-pixel-per-channel floating point	All except most GLES2 Android devices	None
`lrb`	16 bit fixed point luminance; 8 bit red and blue	All except iOS < iPad Air	None
`r11g11b10`	Floating point, 11 bits per channel R and G, with 10 bit B.	PC (DX11 & GL), PS4, Xbox One	`-backend DX11` or `-backend GL`
`r9g9b9e5`	Floating point, 9 bits per channel mantissa with shared 5 bit exponent.	PC (DX11 & GL), PS4, Xbox One	`-backend DX11` or `-backend GL`
`rgbm`	8 bit fixed point red, green and blue, with an 8 bit multiplier. See below for details.	All except iOS < iPad Air	None

`-bouncequality`

Sets the bounce quality (from 0.0 to 1.0) to use when solving irradiance. See Bounce Resampling.

`-entireprobesetsolver`

Enables the Enlighten Entire Probe Set Solver and specifies the type of spherical harmonic output it computes.

Value	Feature	Platforms	Dependencies
`l1`	Compute L1 SH output values	PC, OS X, Linux, PS4, Xbox One, iOS, Android	None
`l2`	Compute L2 SH output values	PC, OS X, Linux, PS4, Xbox One, iOS, Android	None

`-compressedprobeoutput`

Use compressed Enlighten probe solver output.

`-loadclusterdebugdata`

Load the clustering debug data generated by the precompute. Required for some visualisers.

`-loadlighttransportdebugdata`

Load the light transport debug data generated by the precompute. Required for some visualisers.

`-loadmeshsimpdebugdata`

Load the mesh simp debug data generated by the precompute. Required for some visualisers.

Internal structure

GeoViewer relies on the support libraries that are shipped as part of the SDK. It uses GeoEn2Support to load the scene files and GeoRender to abstract the platform-specific rendering code, as well as a repository of common graphics operations and the High-Level Run-Time (EnlightenHLRT) to drive the Enlighten run-time.

Known limitations

While GeoViewer supports the same scene format as GeoRadiosity, it has not been tested with a large variety of test scenes and may not yet render all scenes correctly.