class Enlighten::IPrecompProbeSetBuildParameters

A class defining parameters for SH sample probe building.

Functions

virtual Geo::s32 Enlighten::IPrecompProbeSetBuildParameters::GetBudget

public: Geo::s32 GetBudget() const

The number of form factors to store per output sample.

virtual const Geo::v128& Enlighten::IPrecompProbeSetBuildParameters::GetCoefficientBasisX

public: const Geo::v128 & GetCoefficientBasisX() const

The basis vectors for the probe coefficients.

Must be axis aligned and orthonormal. Defaults to (+x, +y, +z).

virtual const Geo::v128& Enlighten::IPrecompProbeSetBuildParameters::GetCoefficientBasisY

public: const Geo::v128 & GetCoefficientBasisY() const

The basis vectors for the probe coefficients.

Must be axis aligned and orthonormal. Defaults to (+x, +y, +z).

virtual const Geo::v128& Enlighten::IPrecompProbeSetBuildParameters::GetCoefficientBasisZ

public: const Geo::v128 & GetCoefficientBasisZ() const

The basis vectors for the probe coefficients.

Must be axis aligned and orthonormal. Defaults to (+x, +y, +z).

virtual const Geo::s8* Enlighten::IPrecompProbeSetBuildParameters::GetCoefficientOrder

public: const Geo::s8 * GetCoefficientOrder() const

The desired output order of the coefficients.

Must be called after SetNumSHCoefficients. The length of the array must be 4 for L1 probe sets, and 9 for L2. Each value maps the indexed coefficient to the position of the index in the coefficientOrder array. By default the order is {012345678} which maps to an output order of: Y_00, Y_11, Y_10, Y_1-1; Y_20, Y_21, Y_2-1, Y_2-2, Y_22

virtual float Enlighten::IPrecompProbeSetBuildParameters::GetCullingThreshold

public: float GetCullingThreshold() const

Determines the threshold of valid visibility below which a point is culled.

virtual float Enlighten::IPrecompProbeSetBuildParameters::GetDependencyIncludedSystemDistance

public: float GetDependencyIncludedSystemDistance() const

Bounding box of the probe set (i.e. bounding box containing all the probes) whose dependencies are being calculated is.

All systems whose bounding boxes intersect this expanded bounding box will be fully represented in ray tracing when calculating dependencies. Other systems will be represented as bounding boxes only.

virtual float Enlighten::IPrecompProbeSetBuildParameters::GetDependencyLocalityDistance

public: float GetDependencyLocalityDistance() const

Maximum distance at which a given system will be considered local.

virtual float Enlighten::IPrecompProbeSetBuildParameters::GetDependencyVisibilityThreshold

public: float GetDependencyVisibilityThreshold() const

Do not consider a system as a dependency if its visibility is smaller than the threshold.

Specify 0 to accept systems with any visibility.

virtual Geo::s32 Enlighten::IPrecompProbeSetBuildParameters::GetEnvironmentResolution

public: Geo::s32 GetEnvironmentResolution() const

The resolution for each face of the environment map.

virtual float Enlighten::IPrecompProbeSetBuildParameters::GetErrorThreshold

public: float GetErrorThreshold() const

Determines the threshold of interpolation error below which a point may be removed.

virtual bool Enlighten::IPrecompProbeSetBuildParameters::GetExcludeEnvironmentInPrimaryBounce

public: bool GetExcludeEnvironmentInPrimaryBounce() const

Whether to exclude environment when solving the probes directly.

virtual bool Enlighten::IPrecompProbeSetBuildParameters::GetIndividualProbes

public: bool GetIndividualProbes() const

Whether to treat the probes in this set entirely individually, and disable optimisations in the EntireProbeSetSolver which share data between probes.

This is useful for probe sets of "dedicated" probes which are positioned exactly where required by static meshes, but not near each other. The default value is false.

virtual Geo::s32 Enlighten::IPrecompProbeSetBuildParameters::GetNumEnvironmentVisibilitySHCoefficients

public: Geo::s32 GetNumEnvironmentVisibilitySHCoefficients() const

The number of SH coefficients used for environment visibility.

Can be Enlighten::SH_ORDER_DISABLED, Enlighten::SH_ORDER_L0, Enlighten::SH_ORDER_L1 or Enlighten::SH_ORDER_L2.

virtual Geo::s32 Enlighten::IPrecompProbeSetBuildParameters::GetNumSHCoefficients

public: Geo::s32 GetNumSHCoefficients() const

The number of SH coefficients used.

Can be Enlighten::SH_ORDER_L1 or Enlighten::SH_ORDER_L2.

virtual Geo::s32 Enlighten::IPrecompProbeSetBuildParameters::GetQuality

public: Geo::s32 GetQuality() const

The number of rays to cast for computing form factors.

virtual bool Enlighten::IPrecompProbeSetBuildParameters::GetUseCulling

public: bool GetUseCulling() const

Whether to cull probes that are not in valid locations.

virtual float Enlighten::IPrecompProbeSetBuildParameters::GetVisibilityThreshold

public: float GetVisibilityThreshold() const

The necessary visibility of a cluster to be used as form factor.

virtual void Enlighten::IPrecompProbeSetBuildParameters::SetBudget

public: void SetBudget
(
    Geo::s32 budget
)

The number of form factors to store per output sample.

virtual void Enlighten::IPrecompProbeSetBuildParameters::SetCoefficientBasis

public: void SetCoefficientBasis
(
    const Geo::v128 & basisX,
    const Geo::v128 & basisY,
    const Geo::v128 & basisZ
)

The basis vectors for the probe coefficients.

Must be axis aligned and orthonormal. Defaults to (+x, +y, +z).

virtual void Enlighten::IPrecompProbeSetBuildParameters::SetCoefficientOrder

public: void SetCoefficientOrder
(
    const Geo::s8 * coefficientOrder
)

The desired output order of the coefficients.

Must be called after SetNumSHCoefficients. The length of the array must be 4 for L1 probe sets, and 9 for L2. Each value maps the indexed coefficient to the position of the index in the coefficientOrder array. By default the order is {012345678} which maps to an output order of: Y_00, Y_11, Y_10, Y_1-1; Y_20, Y_21, Y_2-1, Y_2-2, Y_22

virtual void Enlighten::IPrecompProbeSetBuildParameters::SetCullingThreshold

public: void SetCullingThreshold
(
    float cullingThreshold
)

Determines the threshold of valid visibility below which a point is culled.

virtual void Enlighten::IPrecompProbeSetBuildParameters::SetDependencyIncludedSystemDistance

public: void SetDependencyIncludedSystemDistance
(
    float v
)

Bounding box of the probe set (i.e. bounding box containing all the probes) whose dependencies are being calculated is.

All systems whose bounding boxes intersect this expanded bounding box will be fully represented in ray tracing when calculating dependencies. Other systems will be represented as bounding boxes only.

virtual void Enlighten::IPrecompProbeSetBuildParameters::SetDependencyLocalityDistance

public: void SetDependencyLocalityDistance
(
    float v
)

Maximum distance at which a given system will be considered local.

virtual void Enlighten::IPrecompProbeSetBuildParameters::SetDependencyVisibilityThreshold

public: void SetDependencyVisibilityThreshold
(
    float v
)

Do not consider a system as a dependency if its visibility is smaller than the threshold.

Specify 0 to accept systems with any visibility.

virtual void Enlighten::IPrecompProbeSetBuildParameters::SetEnvironmentResolution

public: void SetEnvironmentResolution
(
    Geo::s32 v
)

The resolution for each face of the environment map.

virtual void Enlighten::IPrecompProbeSetBuildParameters::SetErrorThreshold

public: void SetErrorThreshold
(
    float errorThreshold
)

Determines the threshold of interpolation error below which a point may be removed.

virtual void Enlighten::IPrecompProbeSetBuildParameters::SetExcludeEnvironmentInPrimaryBounce

public: void SetExcludeEnvironmentInPrimaryBounce
(
    bool v
)

Whether to exclude environment when solving the probes directly.

virtual void Enlighten::IPrecompProbeSetBuildParameters::SetIndividualProbes

public: void SetIndividualProbes
(
    bool b
)

Whether to treat the probes in this set entirely individually, and disable optimisations in the EntireProbeSetSolver which share data between probes.

This is useful for probe sets of "dedicated" probes which are positioned exactly where required by static meshes, but not near each other. The default value is false.

virtual void Enlighten::IPrecompProbeSetBuildParameters::SetNumEnvironmentVisibilitySHCoefficients

public: void SetNumEnvironmentVisibilitySHCoefficients
(
    Geo::s32 numCoefficients
)

The number of SH coefficients used for environment visibility.

Can be Enlighten::SH_ORDER_DISABLED, Enlighten::SH_ORDER_L0, Enlighten::SH_ORDER_L1 or Enlighten::SH_ORDER_L2.

virtual void Enlighten::IPrecompProbeSetBuildParameters::SetNumSHCoefficients

public: void SetNumSHCoefficients
(
    Geo::s32 numCoefficients
)

The number of SH coefficients used.

Can be Enlighten::SH_ORDER_L1 or Enlighten::SH_ORDER_L2.

virtual void Enlighten::IPrecompProbeSetBuildParameters::SetQuality

public: void SetQuality
(
    Geo::s32 quality
)

The number of rays to cast for computing form factors.

virtual void Enlighten::IPrecompProbeSetBuildParameters::SetUseCulling

public: void SetUseCulling
(
    bool useCulling
)

Whether to cull probes that are not in valid locations.

virtual void Enlighten::IPrecompProbeSetBuildParameters::SetVisibilityThreshold

public: void SetVisibilityThreshold
(
    float visibilityThreshold
)

The necessary visibility of a cluster to be used as form factor.